Step & Form Liners

These cut stone form liners come in many different width’s. These are used on the front of steps to form a design.  

A 45° angle at bottom of the liner provides extra access for finishing the top of slab right up to the face of the step. Flexible high quality, mul...

Achieve a 2 1/4″ cantilevered cut stone edge above a 5″ textured riser without complex forming. This liner is designed to allow for finishing of st...

Individual 6″ liners can be stacked to various desired heights.  End piece sets designed for simplified forming of 8″ or 10″ thick walls.  Two uniq...

Recommended Set: 9 Rigid of 55″ x 16″  (3 Black, 3 Blue, 3 Green), 2 Floppy, 2 Touch Up Skins A wider, more weathered wood pattern.  The 4″ End Gra...

8 Foot Long Ultra-thin Super flexible for creating organic shapes Available in slate and stone textures Sized to dimensional lumber Approximately ...

2 1/8 inches high x 8 feet long

Achieve a cantilevered wood grain edge and wood textured riser without complex forming.  This Liner is designed to allow for finishing of step or s...

They are commonly used to face patio edges and steps or used as a form liner. To be used with Gilpin Falls Bridge Plank and 6" Wood Plank Stamps

Can be used to create stand alone columns or in conjunction with the Country Ledge Form Liner System• Natural look of real stone• Extender pieces a...

 Used to create an end grain texture/pattern on the face of a slab or riser when using Gilpin’s Falls Bridge Plank stamp pattern

Dimensions: 5 1/8 inches high x 8 feet (approx.) long The Riser Slate Liner is designed to be used with the 2 1/2″ Cantilevered Cut Stone Step Line...

Available in 2 1/2" and 4". To be used in conjunction with a step liner to complete the full step look. 

2 3/8 x 8′ Bare Tree Edge Liner

Designed for Concrete Counter top edges, Step risers, Fire place hearths and much, much more.